Question: Can You Put A TV On A Chimney Wall?

Can you mount a TV on a brick chimney?

Mounting a TV always requires special equipment, no matter what type of wall you use.

Mounting a TV above a brick fireplace requires masonry bits and a hammer drill to get the job done..

How far away does a TV need to be from a fireplace?

If the TV is placed too low, the mantel will appear cluttered and the fireplace will seem off-balance. To avoid this problem, allow 7 inches of clearance between the top of the mantel and the bottom of the flat-panel TV.

Is it better to drill brick or mortar?

Brick is the best choice if it’s in good condition. Brick is a lot stronger than mortar and can hold heavy objects such as televisions. Mortar should only be drilled if the brick is too fragile and therefore susceptible to cracking. Unfortunately, mortar will only ever hold lightweight items securely.

Where does the sky box go when TV is above Fireplace?

If you want to install your Sky Q box behind the TV on the wall I can recommend the HIDEit Sky Q wall mount. You simply fix this to your wall behind the mounted TV position, slot inside and mount the TV over the top hiding the box altogether. Ingenious and no need to worry about the Sky box falling loose.

How do you hide the cords on a wall mounted TV?

Run TV Wires Behind the Wall The best solution for keeping the cords of a wall-mounted TV out of sight involves hiding them behind the wall itself using recessed cable plates (e.g., Datacomm Cable Organizer Kit, available on Amazon).

Can you mount a TV on a single brick wall?

A safe and sturdy TV wall mounting job requires total knowledge of the wall structure that the TV will be mounted on. … Single brick walls present the risk of drilling through the entire wall if care is not taken, where as the risk is not present with cavity walls.

Can you put an electric fireplace under a TV?

Can You Put An Electric Fireplace Under A TV? An electric fireplace can be installed under a TV but it must be ensured that the TV doesn’t block the heater on the fireplace. Different models of electric fireplace will have the heater located in different positions.

How do you mount a TV on a brick wall without drilling?

To mount a TV on a brick wall without drilling, you can consider strong adhesives or a hybrid stand, which would allow you to mount a TV on it instead of the wall. Good options include brick clip-on hangers, hook hangers, or rails.

Are there studs behind a fireplace?

Most homes are built with 16” on-center studs, which means there should be a stud every 16”. Keep this in mind if you have trouble finding studs above a fireplace. Don’t worry if you only find one stud when trying to mount a large TV or other heavy object.

How do you hide wires in a brick wall?

#1 is to remove and replace brick to put the wires behind them and #2 is to just remove enough mortar to accommodate the wires and a facing of mortar to conceal the wires in the brick’s mortar step pattern. I think your only other options are to either apply a faux brick wallpaper or exterior siding to the wall.

Why are there no studs above my fireplace?

This is a common scenario when trying to find studs above a fireplace, where there may not know actually be any studs to find. At this point, you need to drill into the wall. … You could make the hole large enough to actually peer inside the wall, or just large enough to fit an angled, thin tool in the wall.

How do I protect my TV from fireplace heat?

Install a heat shield, fireplace hood, or mantel above your fireplace opening to divert the heat from your TV. It is strongly suggested that you do not place your TV directly on the mantel as the mantel may not hold the weight of your TV.

How do you lay a room with a fireplace and TV?

Layout Hacks: Our Favorite Tricks to Incorporate TV Viewing into any Living Room LayoutUse the back of your sofa to define the space.Try swivel chairs for an easy swap to TV-viewing.Divide a large space into multiple zones.Place your TV next to the fireplace, on an angle.Use your sofa to divide the space.More items…•

Is it OK to hang TV over fireplace?

The short answer is – yes. However, to ensure your television isn’t damaged from the heat, care must be taken to ensure heat generated by the fireplace is redirected away from television. There are several ways to do this, such as installing a proper mantel and building an alcove for the television.

How do you mount a TV on a fireplace without studs?

This is your best bet. You mount a piece of plywood or 2 boards using toggle bolts, then attach the mount to that. The more surface area against the drywall the better. You wont be able to hang from it, but a newer LED TV should be fine.

Can TV fall off wall mount?

There is a chance that even with a good quality TV mount and fixings correctly secured that the TV could fall off the wall by it not being installed properly. This is usually done by someone that does not have the skill-set to mount TV’s to walls, this could be a rogue trader or “Cowboy” as they are often known.

Is it safe to drill into a chimney?

It’s nearly impossible to drill through stones. So you might simply be hitting a stone and can’t go any further. If you have a decent hammer drill, that may shatter the stones and allow you drill deeper.

Where should a fireplace be placed in a living room?

If you do not have central heating system consider placing your fireplace at the center, between your dining and living room. If your home has an open-space layout, this type of fireplace makes for an inviting location throughout the home and has the added bonus of keeping two spaces equally warm.