Question: How Do You Get Bark Off Burl?

What do you do with a tree burl?

Because the pattern or grain of burl wood is so irregular and uneven and so different from straight lumber graining, burl is not used for structures or where bearing weight is required.

Burl is typically made into veneer panels, inserts, and for furniture slabs and instrument making..

How do you clean wood burls?

Clean burled wood that is sealed with polyurethane by adding mild dish soap to warm water. Dip a clean, lint-free cloth into the solution and wring it out until it is damp. Wipe the surface of the burled wood, and then dry it with a second clean cloth.

Why is Burl so expensive?

Burl Wood. Because the grain is twisted and interlocked, burl wood is extremely dense and resistant to splitting. Burls have become so valuable that poachers have even been known to cut them from the side of trees in national parks, such as the ancient redwoods in California.

How much are oak burls worth?

A reasonable price for normal burl (not wild) red oak is about $6 a board foot. It can go to $15 a board foot. If you sell it as blanks, it can go for $3-$7 a blank.

Can you remove a burl without killing tree?

Is it possible to harvest a burl without killing the tree? Sure is. You cut the tree off on top of the burl, then cut the burl off. Put the tree back on the stump.

Does removing a burl kill the tree?

U.S.A. From my experience in the landscaping industry, cutting the burl off won’t necessarily kill the tree, but the big spot missing the bark WILL leave it open to all kinds of potentially deadly disease and insect problems.

What causes a burl in a tree?

A burl results from a tree undergoing some form of stress. It may be caused by an injury, virus or fungus. … Almost all burl wood is covered by bark, even if it is underground. Insect infestation and certain types of mold infestation are the most common causes of this condition.

Where can I find burl wood?

Scan the base of the trunk and any damaged areas. In some tree species, like redwoods, burls tend to appear near the base of the trunk. These burls are actually part of the redwood’s reproductive process. With any tree species, also check areas of obvious damage, such as a broken-off limb.

How do you remove bark from Burl?

Got out the hammer put the burl on the driveway and proceeded to beat that thing like a rented mule. Hit it with the pressure washer a gain and viola, some small chunks of bark came off. Periodically I would stop the pressure washing and pick at the bark with a small screwdriver which loosened more small bits.

How much is a tree burl worth?

Most burls, especially layered burls, are not particularly valuable. On the other hand, a larger eyed burl in good condition should bring $25 to $200 depending on size, species and condition. I have had burls up to 8 feet in diameter, and many in the 4-5 foot range. Those can be worth $500 or more.

How do you remove burls from a tree?

Lumber company owner Jim Doll harvests a small burl from this cherry log by chainsawing it, cutting just under the bark above and below the burl. Removing a small burl from a tree is straightforward: simply cut a little below where the burl is attached. Larger burls are not so easy.

What is the most expensive burl wood?

It is the burl of a kind of paduak. The most expensive wood I have personally sold was some 5A cocobolo burl blocks. Those sold for 200 each. Tulipwood, kingwood and Bois de rose burls are all ultra rare rosewood by themselves, the burls are incredibly rare can reach into the 250-350 a block price ranges.

Where can I sell my burls?

eBay is a good place to sell Box Elder burl because there’s a few guys, one in particular who dyes and stabilizes woods and resells it mostly as knife scales (because they are so profitable) but also as pistol grip blanks. eBay can actually be a good place in your situation.

Is burl wood valuable?

High-quality burl wood can run $5 a pound. A large trunk can clock in at 10,000 pounds, so “you have to put out $50,000 before you even cut it.”

How do you price a Burl?

For common burls, lots are sold for 25-50 cents per pound green and a dollar to $1.50 dried to 15%. That is on the blind. As Cody stated, once open and grain exposed, the swing in price is far greater.

How do you dry burls?

Cut a foot of trunk waste wood on each side. Seal as soon as practical. Let dry for several years and then trim back the extra. Check the moisture content in the new cuts and re-seal to dry a year more.

What is burl wood furniture?

Beloved for its unique, abstract graining, burl wood furniture is experiencing a revival of the best kind. … A burl is a tree growth in an area that’s been mistreated by illness, fungus, or infestations of insects or mold. It’s found underground in the tree roots, in rounded outgrowths on the trunk or on knotty branches.

What does a burl look like on a tree?

These growths can be located near the roots, in the middle of a tree, or even in a ring all the way around the tree. They look like spherical bulges that are covered in bark. These unusual growths are known as burls. … For example, some burls may be caused by an insect infestation or an attack by a particular fungus.

What types of trees have burls?

There are a number of well-known types of burls. Quality burl wood often comes from redwood, walnut, buckeye, maple, baldcypress, teak, and other species. The famous birdseye maple superficially resembles the wood of a burl but is something else entirely.